pumping over into f+e tank

jay1 · 24 Feb 2009

hi all,
i have come across a slight problem, its an open vented system with a netaheat boiler, what happens is after the heating or hot water is turned off a little bit off water discharges into the f+e tank. this has happened after it has been powerflushed.
I have replaced the tee pipework section to the pump from the f+e after being told that may be the cause.
any ideas guys

doitall · 25 Feb 2009

Turn the pump down to 2.

Bambergaspipe · 25 Feb 2009

System overheating somewhere, could be sludged up. Could be a minor blockage after flush.

D_Hailsham · 25 Feb 2009

Do you have two systems with the same problem or have you posted the same problem twice?

pumping over into f+e tank

jay1 · 25 Feb 2009

1 problem posted twice by mistake

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

pumping over into f+e tank

jay1

doitall

Bambergaspipe

D_Hailsham

jay1

DIYnot Local

Similar threads