- Joined
- 25 Nov 2019
- Messages
- 6
- Reaction score
- 1
- Country
Wondering if someone can give me some advice before I dive deep into the manual.
-Alarm system was set up by installer a few months (June 2019) back and we had no issues to start with, recently we had a power cut that lasted more than 10 hours, after power outage the PIRs (3) of have not worked. Door contacts 2 of, still operate correctly
Q1) Does the system loose its some of the settings after a long power outage?
Q2) Do the PIRs work in walk test mode?....and do they need "time" to come out of sleep mode, or should they work immediately when activated in test mode........they don't flash at all for some reason, just wondering if some settings have been lost?
any help appreciated
-Alarm system was set up by installer a few months (June 2019) back and we had no issues to start with, recently we had a power cut that lasted more than 10 hours, after power outage the PIRs (3) of have not worked. Door contacts 2 of, still operate correctly
Q1) Does the system loose its some of the settings after a long power outage?
Q2) Do the PIRs work in walk test mode?....and do they need "time" to come out of sleep mode, or should they work immediately when activated in test mode........they don't flash at all for some reason, just wondering if some settings have been lost?
any help appreciated