Pyronix Newbie Zone Programming

[AliSparks]

Hi Folks,

As a total newbie to fitting alarm systems I managed to get 50% of the way there with my new Enforcer V10.

I am now stuck on creating zones, so a step by step would be huge appreciated.

I have 8 PIRs and 2 door contacts with a external bell.

I would like to create 2 zones only:
1) Full set
2) Part set for night (downstairs only)

I have had a crack at it using the programming manual and the videos on YouTube but getting nowhere fast!

Thanks in advance

 

[Fozzy_75]

Try this;

When you are in change inputs area, put all of your upstairs PIR’s in ‘A’ and your downstairs PIR’s/Door mags in ‘B’.

When you program your key fob, buttons 1&2 arm/disarm ‘A’ & ‘B’ (full set) and buttons 3&4 arm/disarm ‘B’ (downstairs only)

You can also use the home control/pro control app to set either area’s

Hope that makes sense/helps

 

[sparkymarka]

Put all zones in A , put all zones you want ON in night also in B
Eg front door , final exit A,B , omit , chime
Landing , intruder , A, omit

 

[AliSparks]

Thanks guys, what should I set as the input areas 0 or 1?

 

[AliSparks]

Thanks @sparkymarka! Got it up and running!