Hi. Had a new radiator fitted recently and during cold snap noticed it was showing signs that we may have pulled sludge into it
Normally flush system through every year but been a bit lazy the last two.
Tried balancing trick but to no avail
So injected Fernox into Rad with no immediate result. Eventually very slight improvement.
The radiator is downstairs and two other radiators on that floor. If I now isolate these two there is a vast difference in temperature.
I am thinking that the Fernox is slowly doing its stuff and with the two rads isolated the pressure is concentrated through the dodgy rad thus giving me heat and
hopefully helping the Fernox do ts bit.
Your thoughts would be appreciated
Normally flush system through every year but been a bit lazy the last two.
Tried balancing trick but to no avail
So injected Fernox into Rad with no immediate result. Eventually very slight improvement.
The radiator is downstairs and two other radiators on that floor. If I now isolate these two there is a vast difference in temperature.
I am thinking that the Fernox is slowly doing its stuff and with the two rads isolated the pressure is concentrated through the dodgy rad thus giving me heat and
hopefully helping the Fernox do ts bit.
Your thoughts would be appreciated