Not disconnected.
And I have narrowed down which circuit it's on, as one of the RCDs did trip.
Should probably have double checked the settings on my multimeter
Random socket
- Thread starter mikeey84
- Start date
And I have narrowed down which circuit it's on, as one of the RCDs did trip.
Should probably have double checked the settings on my multimeter
Sponsored Links
What are you asking?
It's not a socket.
It's not a socket.
No asking anything, just reporting back to TTC that it wasn't disconnected, and is live, and on the socket circuit.
Then you probably could replace it with a single socket outlet
PS
Suggest you read this article on safe isolation, before you go any further.
https://www.electricalsafetyfirst.org.uk/media/1201/best-practice-guide-2-issue-3.pdf
PS
Suggest you read this article on safe isolation, before you go any further.
https://www.electricalsafetyfirst.org.uk/media/1201/best-practice-guide-2-issue-3.pdf
Sponsored Links
Thanks. Was planning on turning the whole board off to isolate anyways.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
