Hi folks, my oil Rayburn XT was working fine and serviced 3/12 ago. The oven started switching itself off a week ago. It purges fine, burns well for 5-10mins then switches itself off, when reset button pushed then restarts but only for 20 -30 secs. Powerflue working okay. The guy who supposedly serviced it didn't replace the nozzle and so Ive now done this. Its an Ecoflam minor 1 burner. Ive checked all the oil lines and filters, bled all air out of the system - anyone now how to check the Solenoid or solenoid stem, or do I just have to replace them and see if it fixes it? Same question with the photocell? My local Rayburn engineer wants £175 before he take a step over the door and I normally do all my own plumbing / heating so im baulking abit at paying again before he even starts working! Any advice gratefully received.
Alan
Alan