Re-laying shed floor.

[Sonny88]

Hi All,

What would be the best/easiest way to re-lay shed floor, about 2 x 1.5 m.

to raise it up about one inch and to make it flat-ish. At the moment its a

concrete floor but with a very rough finish.

Mix ratio's would also be helpful.

Thanks in advance.

 

[lucretius]

river sand mixed with cement, mix it 3 sand 1 cement.
Pva the floor first and add a capfull of pva to the mix. The screed wants to be mixed quite dry. Put a couple of timbers down on the floor first then screed off with a straight edge working back towards the door, finish with a trowel as you go