- Joined
- 11 Dec 2007
- Messages
- 400
- Reaction score
- 2
- Country
Looking on the tins i have it'll say recoat time - 45mins, 4 hours etc etc.
I'm just wondering if 'next stage' time is considered to be the same thing (or rather same waiting time) as recoat?
By next stage i mean maybe some light sanding if necessary, or certainly moving from say primer to top coat.
I'll be using Zinsser BIN, then some Johnstones undercoat & then Johnstones Aqua Gloss in some cases whereas Sikkens Rubbol BL Satura in other cases.
I know the undercoat is possibly an unnecessary step, but i have a fair tin of it & it'll go to waste if i don't use. Plus i did this when painting other areas & it turned out fine.
Or is it different when going to the 'next stage'? I've always left at least 24 hours for that in the past.
I'm just wondering if 'next stage' time is considered to be the same thing (or rather same waiting time) as recoat?
By next stage i mean maybe some light sanding if necessary, or certainly moving from say primer to top coat.
I'll be using Zinsser BIN, then some Johnstones undercoat & then Johnstones Aqua Gloss in some cases whereas Sikkens Rubbol BL Satura in other cases.
I know the undercoat is possibly an unnecessary step, but i have a fair tin of it & it'll go to waste if i don't use. Plus i did this when painting other areas & it turned out fine.
Or is it different when going to the 'next stage'? I've always left at least 24 hours for that in the past.
