We currently have Megger 1502 meters but are looking to upgrade to another Megger or even consider another make altogether if anything comes recommended.
The reason why we're looking to change is lack of automatic RCD test which means we have to carry out five manual tests per circuit (RCBO's) which is going to be a hassle for 10 circuits or so. Also the backlight is pretty poor in that a press of the button gives around 5 seconds of light then it switches back off again.
We previously had Fluke 1653's but sold them due to spurious loop impedance readings.
So, what do you use or recommend?
The reason why we're looking to change is lack of automatic RCD test which means we have to carry out five manual tests per circuit (RCBO's) which is going to be a hassle for 10 circuits or so. Also the backlight is pretty poor in that a press of the button gives around 5 seconds of light then it switches back off again.
We previously had Fluke 1653's but sold them due to spurious loop impedance readings.
So, what do you use or recommend?