I have decided to re fit my bathroom as it is very small and could be set out far better to save space.
I am lloking for advice firstly on how i cap water pips and how i join one pipe to another as i currently don't have a shower but will be fitting one when i fit the bathroom (a mixer shower).
At the moment my toilet backs straingt onto the waste diposal pipe on the wall but i would like to move it to the other side of the bathroom however what is the minimum downward slope angle i can have for the waste pipe as it will have to run and extra 4 feet to reach the waste disposal pipe and around a ninty degree corner then head out through the wall and into the down pipe outside.
I'm sure i'll have other questions but for now i'd appreciate if anyone can advise me on any of these basic issues thank you in advance,
col
I am lloking for advice firstly on how i cap water pips and how i join one pipe to another as i currently don't have a shower but will be fitting one when i fit the bathroom (a mixer shower).
At the moment my toilet backs straingt onto the waste diposal pipe on the wall but i would like to move it to the other side of the bathroom however what is the minimum downward slope angle i can have for the waste pipe as it will have to run and extra 4 feet to reach the waste disposal pipe and around a ninty degree corner then head out through the wall and into the down pipe outside.
I'm sure i'll have other questions but for now i'd appreciate if anyone can advise me on any of these basic issues thank you in advance,
col