DIY novice here. I want to refurbish this coffee table (photo shows table after surface rough sanded with a rectangular orbital sander) I used 40 grade paper so far for initial sand, will find sand surface next.
Questions...
1) What sanding tools are best to sand the intricate legs ?
2) What grade sandpaper should I be using for initial sand and for fine sand ?
3) Once sanded, what do I need to do to make it look good ? I've watched a couple of youtube videos, but want confirmation... see following questions...
4) What staining product is good (but cheap) for this job.. I'm looking to get a light colour.
5) After staining, can you recommend a varnish ?
6) Is there anything else I should do?
Thanks in advance.