We have a Zanussi TD100 Tumble Dryer which today stopped working in mid-run.
I have checked that there is power to the socket, and the 13A fuse has not blown. What I would like is a (constructive) steer towards the next step(s).
I have searched on this site & others, and have not found any advice or service manuals for this model; (I'm not surprised about the manuals, as we bought the dryer in 1986.) Some years back I replaced the drum bearings, and I see that some spare parts are still available.
The TD100 is a simple model with one control - a rotary knob to set the time, which unwinds to zero (and cuts the heat 10 minutes before the end.) It suits us, given the limited use we make of it, and we don't want to scrap it if we don't have to.
I have checked that there is power to the socket, and the 13A fuse has not blown. What I would like is a (constructive) steer towards the next step(s).
I have searched on this site & others, and have not found any advice or service manuals for this model; (I'm not surprised about the manuals, as we bought the dryer in 1986.) Some years back I replaced the drum bearings, and I see that some spare parts are still available.
The TD100 is a simple model with one control - a rotary knob to set the time, which unwinds to zero (and cuts the heat 10 minutes before the end.) It suits us, given the limited use we make of it, and we don't want to scrap it if we don't have to.