Anyone had any experience using rear demister repair paint?
Specifically this type: https://www.rapidonline.com/Kemo-L1...9_7de8ec4f50e0c458992f2feb2d027e9d#dataSheets
A few lines have a few mm where the conductive lines have been pulled off. I suspect when a sticker was used and removed.
I might give it a go as it is only £9 a pop.
According to the data sheet is seems to be rated for the voltage and current of a rear demister.
Specifically this type: https://www.rapidonline.com/Kemo-L1...9_7de8ec4f50e0c458992f2feb2d027e9d#dataSheets
A few lines have a few mm where the conductive lines have been pulled off. I suspect when a sticker was used and removed.
I might give it a go as it is only £9 a pop.
According to the data sheet is seems to be rated for the voltage and current of a rear demister.
Last edited by a moderator: