We have just purchased a new oven, a Hotpoint SC98 (rating appears to be 2250-2400W). The previous electric oven was connected to the mains via a plug and standard socket on the normal household circuit. We have only two rings in the flat - one for the lights and one for the "plugs" (or so it is labelled at the !). The installation instructions say to use "HAR- H 05- RRF quality cables fitted with a plug conforming to the regulations in force" and "Fuse Section: 32A 4mm3". Do we need to install a new fuseway or use a plug in the existing mains socket? Thanks.