- Joined
- 5 Feb 2004
- Messages
- 17
- Reaction score
- 0
- Country
I am about to replace all my rads/pipework.
I have a Baxi 105e combi with a total of nine rads (four down stairs and five upstairs).
I intend to use 22mm copper for the manifolds but am unsure whether to run 15mm copper or microbore to the rads.
Also I will be using a room stat for controlling the boiler, so should I also fit thermostatic valves?
Any advice appreciated.
I have a Baxi 105e combi with a total of nine rads (four down stairs and five upstairs).
I intend to use 22mm copper for the manifolds but am unsure whether to run 15mm copper or microbore to the rads.
Also I will be using a room stat for controlling the boiler, so should I also fit thermostatic valves?
Any advice appreciated.