Hi there, I am planning to replace my T6360B with a wireless DT92E. The thermostat currently sits on my garage wall, in the hall, and as such the temperature is very low, which means the boiler turns on and off far too frequently. My boiler is a condenser potterton promax HE boiler, situated in the kitchen, with a honeywell st6400c timer.
I'm slightly unsure how to wire up the new thermostat.
The T6360B is wired as follows:
earth connected
1 - red wire (live?)
2 - nothing
3 - yellow (switched live?)
4 - nothing
blue (neutral?) is free/terminated
I am guessing the DT92E should be as follows, but not sure
N - blue
L - red
2nd L to A link
B - yellow
Any advice would be much appreciated!
Ben
I'm slightly unsure how to wire up the new thermostat.
The T6360B is wired as follows:
earth connected
1 - red wire (live?)
2 - nothing
3 - yellow (switched live?)
4 - nothing
blue (neutral?) is free/terminated
I am guessing the DT92E should be as follows, but not sure
N - blue
L - red
2nd L to A link
B - yellow
Any advice would be much appreciated!
Ben