M
marsaday
I am researching how to use the resin system for anchoring a wall plate to the wall to carry my new floor in the attic.
i want to reduce the distance between fixings and do it every 300m. Is this a no no?
Do i need to use the sleeve anchors ?
if so is this the correct way of doing things?
1) drill and vac holes
2) slide in sleeves
3) fill with resin
4) screw in bar thread.
5) let set for 24h and come back and slide wall plate onto anchors. tighten up bolts.
Have i made any mistake here?
i want to reduce the distance between fixings and do it every 300m. Is this a no no?
Do i need to use the sleeve anchors ?
if so is this the correct way of doing things?
1) drill and vac holes
2) slide in sleeves
3) fill with resin
4) screw in bar thread.
5) let set for 24h and come back and slide wall plate onto anchors. tighten up bolts.
Have i made any mistake here?