The very old loft conversion has come to the end of the road and while it's being re roofed, we're going for a hip to gable change, moving the stairs, changing layout, etc.
At the moment, the existing upstairs ring circuit has been extended up into the loft. I know it's not best practice, but due to the position of the consumer unit, it would be a pain to run another ring up to the loft. Is it acceptable to keep this arrangement? The upstairs ring will serve 6 bedrooms in total.
With LED bulbs, there's probably only about 200w being drawn with every light in the house on, so I was assuming the lighting circuit is ok as it is.
Many thanks. Barry
At the moment, the existing upstairs ring circuit has been extended up into the loft. I know it's not best practice, but due to the position of the consumer unit, it would be a pain to run another ring up to the loft. Is it acceptable to keep this arrangement? The upstairs ring will serve 6 bedrooms in total.
With LED bulbs, there's probably only about 200w being drawn with every light in the house on, so I was assuming the lighting circuit is ok as it is.
Many thanks. Barry