Ro tubing to american fridge?

[blu3tang]

hi im getting an american fridge with filtered water/ice making facility.

im looking to connect my ro filtered water (50gallon 4 stage ro with pump) to it.

The manual says i need a straight appliance tap or 15mm x 3/4 BSP.

What do i need to connect my ro system to the fridge?
(ro tubing to make it appear as straight appliance tap for the fridge water pipe to screw in?

I can get a convertor for ro system to fit an outside tap*, can you get such a thing that has threads on either side so to screw in the outside tape connection and on the other end to screw in the fridge connection?

*John Guest 3/4 BSP Female to 1/4 Push Fit Fitting

 

[Softus]

Nipple.

If you want unequal sizes, then bush one end of the nipple.

Seriously, these are the proper terms.

 

[WelshMan]

isnt plumbing a nice trade to learn heheh.....nipple,flange just to name a few

 

[Softus]

Quite so. And I never start a job without my trusty pair of testacles.

 

[keego]

I think you hit the t & r key together, did you mean to type rusty.

 

[blu3tang]

just an update/info for anyone else looking to do the same.

You can get a conversion pack from the manufacturer/place where you bought the fridge. In america this is the type of connector used when connection water to big fridge.