I am installing a double oven (20 amps) and a separate hob (32 amps) I want to run a 6mm twin and earth from my consumer unit with a 45amp MCB to a junction box, then run a cable (in 6mm) from the junction box one way to a cooker outlet for the oven and another cable (in 6mm) to another cooker outlet for the hob. Both cooker outlets will have 13 amp sockets.
Would this be OK?
If not would it be OK in 10mm? Or should I just run 2 separate 6mm cables from the fuse board? (I have 2 spare slots left).
I also want to spur of the oven outlet to a 13amp socket to run the dishwasher.
Please advise.
Would this be OK?
If not would it be OK in 10mm? Or should I just run 2 separate 6mm cables from the fuse board? (I have 2 spare slots left).
I also want to spur of the oven outlet to a 13amp socket to run the dishwasher.
Please advise.