Sabre 35HE

[Del Quailey]

Morning All

Woke up this morning to a solid red LED being displayed on the control panel. Normally it flashes green every 5 to 6 seconds..currently the main control knob is positioned at the 0 marker. ..There is no flame but the system seem to be running.... The pressure gauge reads 2.25 bad When the control knob is turned to hit water and heading it flashes Amber then Red .. Turn it back to 0 position it flashes green then back to get.
..Any help would be greatly appreciated

 

[ianmcd]

when you say it flashes yellow then red do mean alternately or does it flash yellow then go to solid red ?

 

[Del Quailey]

Hi,

Yes it's solid red

 

[ianmcd]

well that is supposed to mean faulty thermistor but I have seen other faults causing that , can you hear the fan running at full speed when the red neon light is on ?

 

[Del Quailey]

Yes is running with solid red indicator

 

[ianmcd]

OH dear I would contact Vokera and ask for a fixed price repair , it sounds like you have the single red PCB and the fan relay is faulty the fixed price repair is cheaper than the PCB