I have fitted 2 Multipanel wall panels ( laminated ply ) to my bathroom wall, and very nice they look too.
The panels are joined together vertically with a narrow aluminium strip that protrudes about 1mm from the joint, this prevents the bath from fitting flush with the boards.
Question is, what is the best way to seal a new bath to the wall.
Should I cut away the ally strip just above the bath, ingore the strip and seal a 1mm gap all along the bath anyway or even file a slot in the side of the bath to take in the ally strip !
Thanks.
Dave.
The panels are joined together vertically with a narrow aluminium strip that protrudes about 1mm from the joint, this prevents the bath from fitting flush with the boards.
Question is, what is the best way to seal a new bath to the wall.
Should I cut away the ally strip just above the bath, ingore the strip and seal a 1mm gap all along the bath anyway or even file a slot in the side of the bath to take in the ally strip !
Thanks.
Dave.