- Joined
- 25 Nov 2013
- Messages
- 1
- Reaction score
- 0
- Country
Replacing my old security light.
There are 4 wires that go into the new PIR security light
red
blue
earth
yellow I think this is connected to indoor switch
the connection in the light fitting are neutral earth live and l1.
I have tried the red and yellow both ways in live and L1 ,All that happens is that light stays on all the time.
For now i have taped the yellow wire and put red in live.Light works fine Except that the indoor switch doesn't work.
Can anyone help /advise me on how to connect the yellow wire so that it
will work on indoor switch.
There are 4 wires that go into the new PIR security light
red
blue
earth
yellow I think this is connected to indoor switch
the connection in the light fitting are neutral earth live and l1.
I have tried the red and yellow both ways in live and L1 ,All that happens is that light stays on all the time.
For now i have taped the yellow wire and put red in live.Light works fine Except that the indoor switch doesn't work.
Can anyone help /advise me on how to connect the yellow wire so that it
will work on indoor switch.