Sensor Help

[OxiaUK]

Hi

I have a Honeywell G4 Mini system and I'm wanting to wire 3x PIR sensors and 1x door contact to separate zones on the system...

I have run a 6 core cable to each location but don't know what to do with the wires back at the panel.

I did wire this years ago and it worked fine expect for the fact that it kept randomly going in to tamper mode and setting the alarm off until I removed the tamper wires and linked it out at the panel.

Any help?

 

[Deryck Tintagel]

Have you wired the detectors and contact yet? Photos will be useful

 

[OxiaUK]

no not yet, just cables ready.

 

[secureiam]

power, zone, tamper in series.