Should residential footings have a fall?

Joined
2 Oct 2007
Messages
227
Reaction score
4
Location
Sussex
Country
United Kingdom
Hi

Hopefully, we are digging the footings today for a small extension;
500mm wide x 1m deep

I have just read the following from Cemex
http://www.cemexliterature.co.uk/pdf/Concrete_Readymix_DIY_Guide.pdf

Step 3: Setting a ‘fall’ (fig. 4)
Plan the slope to allow water to run off easily.
Check the forms with a spirit level, and make
one side lower to allow drainage away from
buildings. Normally allow about a 25mm drop
for a 1 metre run.

Is this correct? i.e. do you have to have a fall on residential footings?

I ask because our BI is not the easiest guy to talk to, I'd rather not
have to ask. I thought the footings should be flat.

Any advise would be appreciated.

Thanks.

Stephen

Should residential footings have a fall?
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top