- Joined
- 12 Sep 2006
- Messages
- 94
- Reaction score
- 0
- Country
Ow do
I'm installing a shower in an ensuite and as we have a good bath pressure I'm giving it a go on the shower.
I'm branching off 2 22mm feeds but as a shower mixer input is 15mm I will have to reduce it.
Initially I was going to branch off with an equal 22mm and reduce to 15 near the input but as I akready have 22-15-22 reducer's I'm hoping this will be OK and not reduce pressure too much or will it?
Anyone done this or any advice?
I know it's best to have combi boiler/mains type pressure but I haven't.
Pump is last case scenario.
I'm installing a shower in an ensuite and as we have a good bath pressure I'm giving it a go on the shower.
I'm branching off 2 22mm feeds but as a shower mixer input is 15mm I will have to reduce it.
Initially I was going to branch off with an equal 22mm and reduce to 15 near the input but as I akready have 22-15-22 reducer's I'm hoping this will be OK and not reduce pressure too much or will it?
Anyone done this or any advice?
I know it's best to have combi boiler/mains type pressure but I haven't.
Pump is last case scenario.