Hi,
Total non DIYer here so . . .
I am installing a shower into a bathroom above the bath, i have a NIC EIC contractor to do all the electrics for a Mira ATL 9.8kw.
My question is:
I have a 15mm main powered cold supply to the bath (Well above 1.5bar), i have been told by the sparky that i can get a flexy hose from the 15mm copper to the 1/2" BSP in the shower unit. but i am unable to find such a pipe. also i am no plumber so i was hoping to use a 15mm self cutting tap!
I'd really rather not have to play with copper pipes and these compression valves are confusing me.
regards
Perp
Total non DIYer here so . . .
I am installing a shower into a bathroom above the bath, i have a NIC EIC contractor to do all the electrics for a Mira ATL 9.8kw.
My question is:
I have a 15mm main powered cold supply to the bath (Well above 1.5bar), i have been told by the sparky that i can get a flexy hose from the 15mm copper to the 1/2" BSP in the shower unit. but i am unable to find such a pipe. also i am no plumber so i was hoping to use a 15mm self cutting tap!
I'd really rather not have to play with copper pipes and these compression valves are confusing me.
regards
Perp