- Joined
- 14 Sep 2007
- Messages
- 100
- Reaction score
- 1
- Country
Hi All
Ive just installed a techflow turbo 3 pump in a bathroom.
The hot supply is a dedicated connection from a tech flange ( i like that word... flange) and the cold is from a separate connection from the cold cistern in the loft, although this connection is supplying the ensuite bathroom nextdoor and ive teed into it for the shower pump.
my prob is that although the cold supply is shared, the pump starts to fire intermittently when the cold taps in the ensuite is turmed on, its only for a couple of seconds but its annoying to say the least. I would have expected this if the taps were on the outlet side of the pump
Is there any way of preventing this happening? can i fit something to the cold supply after the tee to the shower pump?
Thanks for any light you can collectively shed on this
Ive just installed a techflow turbo 3 pump in a bathroom.
The hot supply is a dedicated connection from a tech flange ( i like that word... flange) and the cold is from a separate connection from the cold cistern in the loft, although this connection is supplying the ensuite bathroom nextdoor and ive teed into it for the shower pump.
my prob is that although the cold supply is shared, the pump starts to fire intermittently when the cold taps in the ensuite is turmed on, its only for a couple of seconds but its annoying to say the least. I would have expected this if the taps were on the outlet side of the pump
Is there any way of preventing this happening? can i fit something to the cold supply after the tee to the shower pump?
Thanks for any light you can collectively shed on this