Hi all
I wonder if anyone can help. I've got a problem with my shower pump. It is a Watermill Wasp 66 twin imp. The pump is working iratically it will come on with very low flow, I.e. A small turn of the shower tap, if I try to turn the shower on any fuller it cuts out completley. Similarly if I restrict the flow using the hot inlet valve to the pump, the shower will work. If I fully open the inlet it stops. I have bled the pump using hose from the fixed head and also manually bled it from the pump outlet so I'm pretty sure its not air. I have a 2m head so pretty sure its not low pressure. In fact it seems to be the opposite. Too much and it stops. If I turn it on very gradually it will come on at full power but eventually stops.
Any ideas would be most welcome as I'm at my wits end!
Thanks in advance
I wonder if anyone can help. I've got a problem with my shower pump. It is a Watermill Wasp 66 twin imp. The pump is working iratically it will come on with very low flow, I.e. A small turn of the shower tap, if I try to turn the shower on any fuller it cuts out completley. Similarly if I restrict the flow using the hot inlet valve to the pump, the shower will work. If I fully open the inlet it stops. I have bled the pump using hose from the fixed head and also manually bled it from the pump outlet so I'm pretty sure its not air. I have a 2m head so pretty sure its not low pressure. In fact it seems to be the opposite. Too much and it stops. If I turn it on very gradually it will come on at full power but eventually stops.
Any ideas would be most welcome as I'm at my wits end!
Thanks in advance
