I have the above boiler and yesterday when i turned on the hot tap no hot water came out. if i turn the tap to fully open then the boiler fires up for a short period of time but because of the flow rate the water only warms up slightly.
When the central heating is on i can get hot water.
My thinking is that the diverter valve has finally bit the dust, or is on its last legs (due to water heating coming on when its a fast flow rate out of the tap).
the central heating side of the system works fine.
Is there anything else i should check before shelling out £40 for a new valve. IS it easier to replace the diaphragm in the diverter valve or just replace the whole unit.
thanks in advance.
When the central heating is on i can get hot water.
My thinking is that the diverter valve has finally bit the dust, or is on its last legs (due to water heating coming on when its a fast flow rate out of the tap).
the central heating side of the system works fine.
Is there anything else i should check before shelling out £40 for a new valve. IS it easier to replace the diaphragm in the diverter valve or just replace the whole unit.
thanks in advance.