Re this recent post: Posted: Sat Mar 22, 2008 11:29 am Post Subject: cutting section out of skirting boards.
http://cgi.ebay.co.uk/DEWALT-DT2074...ryZ20786QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://www.lawson-his.co.uk/scripts/details.php?cat=Multitools Bosch&product=63500
I need to raise the gap at the bottom of my s/b by approx 5mm to allow for thicker flooring than existing, which will be removed. What is the best tool for this, talking about 12m length with some fiddly bits around doors, columns etc. Does the de walt flush blade in the post above work, or do I need a new machine like the second one recommended?
It will probably still require a trim at the bottom as I'm unlikely to make the perfect cut all round that I would ideally like (unless someone knows of a wonder-tool, I am patient), so if unavoidable, some slight errors would be covered.
http://cgi.ebay.co.uk/DEWALT-DT2074...ryZ20786QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://www.lawson-his.co.uk/scripts/details.php?cat=Multitools Bosch&product=63500
I need to raise the gap at the bottom of my s/b by approx 5mm to allow for thicker flooring than existing, which will be removed. What is the best tool for this, talking about 12m length with some fiddly bits around doors, columns etc. Does the de walt flush blade in the post above work, or do I need a new machine like the second one recommended?
It will probably still require a trim at the bottom as I'm unlikely to make the perfect cut all round that I would ideally like (unless someone knows of a wonder-tool, I am patient), so if unavoidable, some slight errors would be covered.
Links in this post may contain affiliate links for which DIYnot may be compensated.