Hi all, I just received a TCP 2 Gang Smart Lightswitch (https://www.amazon.co.uk/Smart-Light-Switch-Compatible-Google/dp/B081SWPXL3/ref=sr_1_5?crid=3OA3IJTBHT785&keywords=Smart+WiFi+Touch+Light+Switch,+2+Gang&qid=1672330345&sprefix=smart+wifi+touch+light+switch+2+gang,aps,67&sr=8-5) and found an hour to attempt the installation.
I've got the following setup for an existing one way, 2 gang lightswitch:
I wired the new switch in, 3 neutrals were all in a wago box so I connected the neutral and live pair in, and the two wires that were connected to the L1 inputs of the old switch into L1 and L2 in the new switch. Diagram below.
The switch powers on, I even successfully connected to the WiFi and updated the firmware but the actual switching did not work. Neither set of lights came on when the switches were switched to on, I've put the old switch back in and everything works.
Have I been unlucky and got a duff switch or have I misunderstood the wiring here?
Thanks for any pointers!
I've got the following setup for an existing one way, 2 gang lightswitch:
I wired the new switch in, 3 neutrals were all in a wago box so I connected the neutral and live pair in, and the two wires that were connected to the L1 inputs of the old switch into L1 and L2 in the new switch. Diagram below.
The switch powers on, I even successfully connected to the WiFi and updated the firmware but the actual switching did not work. Neither set of lights came on when the switches were switched to on, I've put the old switch back in and everything works.
Have I been unlucky and got a duff switch or have I misunderstood the wiring here?
Thanks for any pointers!