- Joined
- 13 Dec 2019
- Messages
- 81
- Reaction score
- 0
- Country
I'm doing a base for a shed and want to make sure it's perfect. Its a 10ft x 8ft shed base. I've done the framing and checked its square - it has the same measurement from the corners.
When putting the spirit level down on the middle of each side, the spirit level sets perfectly in the middle of most, however for 1 - it sits between the two lines, but kind of kisses one of the black lines.
Is this OK? I've been trying to correct with shims - but then if I correct the one side just kissing the black line, it then puts an alternative side just slightly out of middle kissing the inside of the black line.
Please tell me I am over thinking this and it's fine - with natural deviation etc - otherwise I'm unsure how I will fix.
Thanks
When putting the spirit level down on the middle of each side, the spirit level sets perfectly in the middle of most, however for 1 - it sits between the two lines, but kind of kisses one of the black lines.
Is this OK? I've been trying to correct with shims - but then if I correct the one side just kissing the black line, it then puts an alternative side just slightly out of middle kissing the inside of the black line.
Please tell me I am over thinking this and it's fine - with natural deviation etc - otherwise I'm unsure how I will fix.
Thanks