Spur socket
- Thread starter gasman
- Start date
Sponsored Links
Aslng as you stick to the spurring rules.......YES.
- Joined
- 8 Apr 2004
- Messages
- 386
- Reaction score
- 0
- Country
But it would not be ok to plug your washer AND kettle in to it...
Small washing machine and slow kettle?
Sponsored Links
- Joined
- 8 Apr 2004
- Messages
- 386
- Reaction score
- 0
- Country
And the chances of that are?
no reason why not
a spur properly installed is perfectly capable of taking an appliance that draws the full 13A
putting 2 high load applices in a double socket should not be done as they are only rated at 13A total (a fact that is not well known and imo is a dangerous flaw in the standards) this applies regardless of whether the double socket is on the ring or on a spur
a spur properly installed is perfectly capable of taking an appliance that draws the full 13A
putting 2 high load applices in a double socket should not be done as they are only rated at 13A total (a fact that is not well known and imo is a dangerous flaw in the standards) this applies regardless of whether the double socket is on the ring or on a spur
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
