Hi everyone, I've an old RS1 from british gas. I want to switch to Meross MTS200.
this is my RS1
Is it possible i need to connect like wrote here ->https://www.diynot.com/diy/threads/help-wiring-a-new-thermostat-meross-mts200b.618681/
so like:
"
Blue to N
Red to L
Yellow to NO
Additionally...
Add a short link wire between L and COM
Safely isolate the earth wire in a separate terminal block." ??
in my case:
N Blue -> in number 1 in MEROSS
L Brown - > in number 2 in meross
and 3 black cable with little brown -> in number 3 in meross
and bridge with little cable in meross's box between 2 and 5(COM)?
I think I did but it wasn't working. the boiler does not starting when changes in temperature....
Now i've little doubt maybe i've attach in wrong place 3 to 5 and not 2 to 5. In theory I'm sure I got it right but better ask now... before try again...
this is my RS1
Is it possible i need to connect like wrote here ->https://www.diynot.com/diy/threads/help-wiring-a-new-thermostat-meross-mts200b.618681/
so like:
"
Blue to N
Red to L
Yellow to NO
Additionally...
Add a short link wire between L and COM
Safely isolate the earth wire in a separate terminal block." ??
in my case:
N Blue -> in number 1 in MEROSS
L Brown - > in number 2 in meross
and 3 black cable with little brown -> in number 3 in meross
and bridge with little cable in meross's box between 2 and 5(COM)?
I think I did but it wasn't working. the boiler does not starting when changes in temperature....
Now i've little doubt maybe i've attach in wrong place 3 to 5 and not 2 to 5. In theory I'm sure I got it right but better ask now... before try again...