The new Bath is Shorter!

Joined
27 Jan 2009
Messages
3
Reaction score
0
Location
Bath
Country
United Kingdom
I have a new bath (an Aloha) which is 75mm shorter than the old one
and is 10mm higher at its lowest leg setting.
What is the neatest way to make up the length
What is the best way to trim the tiles 10-15mm
 
Sponsored Links
the height shouldnt be a problem, when youve levelled it up to the tiles silicone it all around

and the short problem, you could build a ledge in the gap.
 
Build a nice ledge at the end of the bath. We have a gap of about 15-20cm at the end of ours which was filled as a ledge level with the end of the bath. It's then tiled in the mosaic tiles that we used on the bath panel. The only thing is you have to be careful not to allow water to sit on it, so as long as your gap's not under the shower area, you should be fine.
 
Sponsored Links
Remember when you tile the ledge to put a very slight slope down towards the bath so any water can run off.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top