- Joined
- 22 Jun 2004
- Messages
- 863
- Reaction score
- 44
- Country
Is it possible to fit a thermostatic mixer on a bath if the flow rates are slightly different?
I dont have a weir cup so used a bucket with litres on the side (crude method I know)
The hot came out at 12 litres per min (0.2 lps)
and the cold 16 litres per min (0.26 lps)
Would this difference cause a problem?
I dont have a weir cup so used a bucket with litres on the side (crude method I know)
The hot came out at 12 litres per min (0.2 lps)
and the cold 16 litres per min (0.26 lps)
Would this difference cause a problem?