- Joined
- 5 Nov 2008
- Messages
- 194
- Reaction score
- 3
- Country
I have offered to fit a shower for my sister in law. It will be a thermostatic mixer fed from the combi boiler.
I intend to tee into the H&C pipes under the bath, bring them up the wall next to the bath and then across to the shower (or ideally across and down to stop drips).
However, all the showers I've seen have the pipework embedded in the wall; this is not an option as the walls are solid brick and are tiled.
Are there any units available that are for surface mounted pipes?
TIA
Mike
I intend to tee into the H&C pipes under the bath, bring them up the wall next to the bath and then across to the shower (or ideally across and down to stop drips).
However, all the showers I've seen have the pipework embedded in the wall; this is not an option as the walls are solid brick and are tiled.
Are there any units available that are for surface mounted pipes?
TIA
Mike
