Hello all! just joined the forum as I am keen DIYer!
I would consider myself to have a fairly good knowledge of DIY.
Just a quick question about a time delayed 100mA RCD.
I had a fuse board with a 30mA rcd and a 100mA time delayed rcd in the board.
I fitted a separate board and took out the 30mA circuits from the old board and fitted them to the new board.
Now in the old board I have only the 100mA time delayed trip covering the circuits.
Question is as I dont have a 30mA rcd in this board anymore will the time delayed work ok as the 100mA or do I have to get a normal type 100mA trip.
I know from reading posts on this forum that the new 17th edition boards are in and everything must be covered with a 30mA.
But I prefer to stick to the 100 if possible as its been working that way this past 10 years and I don'y really want to change the whole board!
Thanks
I would consider myself to have a fairly good knowledge of DIY.
Just a quick question about a time delayed 100mA RCD.
I had a fuse board with a 30mA rcd and a 100mA time delayed rcd in the board.
I fitted a separate board and took out the 30mA circuits from the old board and fitted them to the new board.
Now in the old board I have only the 100mA time delayed trip covering the circuits.
Question is as I dont have a 30mA rcd in this board anymore will the time delayed work ok as the 100mA or do I have to get a normal type 100mA trip.
I know from reading posts on this forum that the new 17th edition boards are in and everything must be covered with a 30mA.
But I prefer to stick to the 100 if possible as its been working that way this past 10 years and I don'y really want to change the whole board!
Thanks