i am putting together some tongue and groove panels - but they are a little warped and bowed - i have no clamp and am having trouble fitting them together.
Make a cramp with a lenght of 4x2 with uprights fixed to it and use wedges to force the boards together, and always use a piece of waste to hammer against when knocking up t&g boards.
But as foxy says if they are too badly warped then it's time to get some new.
Make a cramp with a lenght of 4x2 with uprights fixed to it and use wedges to force the boards together, and always use a piece of waste to hammer against when knocking up t&g boards.
But as foxy says if they are too badly warped then it's time to get some new.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local