Finally got around with trying to rectify my kitchen sink dripping tap. The tap is dual feed single spout unit, hot control left-cold control right. My problem is unlocking the ceramic washer unit on the hot side where the drip is coming from. I don't want to put too much effort onto the unit in case I crack the sink. My question is:
Is the hot tap ceramic washer unit a right hand thread (Clockwise) screw in or left hand thread (Anticlockwise) screw in. Also, is there a tip to ease extraction of this washer unit which is approximately 6 years old. Advice/help much appreciated.
Best wishes from,
Gibson8206.
Is the hot tap ceramic washer unit a right hand thread (Clockwise) screw in or left hand thread (Anticlockwise) screw in. Also, is there a tip to ease extraction of this washer unit which is approximately 6 years old. Advice/help much appreciated.
Best wishes from,
Gibson8206.