hi,
At the weekend I fitted a new bath mixer shower for my mum - It wasn't a cheap one either. It took me about a hour just to get the tap nuts loose as i had about a 3 inch gap with pipes in the way etc.
Anyway it's an open system, gravity fed so I new it wouldn't be the most powerfullest shower but that's not the problem. The pressure is fine on both hot and cold, it's just trying to get the combination of a rasonable temperature to get washed in - as apposed to freezing or redhot. I messed around for about 15 minutes with no joy - it jumps from redhot to cold with the slightest turn.
The cold taps in the bathroom are fed from the rising main. I've been told that this is my problem, because the two are unbalanced.
So am i stuffed guys with an unhappy mummy or is there some gadget that can sort it.
Thanking you all
At the weekend I fitted a new bath mixer shower for my mum - It wasn't a cheap one either. It took me about a hour just to get the tap nuts loose as i had about a 3 inch gap with pipes in the way etc.
Anyway it's an open system, gravity fed so I new it wouldn't be the most powerfullest shower but that's not the problem. The pressure is fine on both hot and cold, it's just trying to get the combination of a rasonable temperature to get washed in - as apposed to freezing or redhot. I messed around for about 15 minutes with no joy - it jumps from redhot to cold with the slightest turn.
The cold taps in the bathroom are fed from the rising main. I've been told that this is my problem, because the two are unbalanced.
So am i stuffed guys with an unhappy mummy or is there some gadget that can sort it.
Thanking you all