Unusual dripping tap

[triff]

I have one of these:
http://www.focusdiy.co.uk/invt/210663
And it drips. Only I cannot get inside it. This photo (http://www.triffitt.com/taps.jpg) shows how far Ive got but I cannot work out how to get the main body of the tap off! Any suggestions? Many thanks
Alex

 

[cozzmic]

If the photo is of the tap head after the screw is undone just pull the head off the spindle and undo the nut to get to the washer. You may need penetrating oil to free off the head from the spindle or heat also don't forget to turn off the water.

 

[triff]

Ok thank you.... I'll give it a go, I've been trying to get it off for ages.....I presumed I was missing a subtly hidden screw!

 

[triff]

Got it off.........for the record it required lots of cif power cream and a good tug......thanks for you help

 

[petetheleak]

lots of cif power cream and a good tug....

The mind boggles.