basically got a friend of a friend to fit my door frame with panels at each side (all in one frame 2000mm x 1800mm) glowing recommendations etc etc
After 8 hours he still hasnt got it finished - I even helped him remove all the old wooden frame and door, hes only got the frame screwed into the brickwork and the panel in but the frame is scew by about an inch on the left compared to the right hand side (its futher set back on the left if this makes sense).
The door opens but does not click shut, it needs to be closed fully and then the handle pulled up to lock.
When the door is closed until the bottom corner of door touches the frame the top corner is about 1/4 inch away from the frame. This is stopping the door from just being pushed closed and it "clicking" shut
Not a happy bunny and told him not to come back luickily I he ran out of time before he started to silicone - he also appears to have only screwed the sides as the frame and it has a load of give in it,
Anybody in Teesside area TS19XXX - fancy a cash job to refit this and make good interior
After 8 hours he still hasnt got it finished - I even helped him remove all the old wooden frame and door, hes only got the frame screwed into the brickwork and the panel in but the frame is scew by about an inch on the left compared to the right hand side (its futher set back on the left if this makes sense).
The door opens but does not click shut, it needs to be closed fully and then the handle pulled up to lock.
When the door is closed until the bottom corner of door touches the frame the top corner is about 1/4 inch away from the frame. This is stopping the door from just being pushed closed and it "clicking" shut
Not a happy bunny and told him not to come back luickily I he ran out of time before he started to silicone - he also appears to have only screwed the sides as the frame and it has a load of give in it,
Anybody in Teesside area TS19XXX - fancy a cash job to refit this and make good interior