Urgent Help Needed. Worcester 28 CDI stopped working!
- Thread starter bigstej
- Start date
Sponsored Links
to change all those parts then say its a flue problem 
. was this a worcester manufacturer engineer or an approved worcester installer engineer ????
. was this a worcester manufacturer engineer or an approved worcester installer engineer ????
R
rules&rulers
Have seen so called manufactures technicians change all the parts (robot fashion) as already listed and the fault to be external to the appliance.
They probably followed the fault finding flow chart, few of these cater for two simultaneous faults such as failed fan AND the PCB damaged by the failed fan.
Sponsored Links
Sorry mate still doesn't add up
R
rules&rulers
If the boiler worked afterwards then great but why change all them parts without prior inspection and testing for external faults first.
Not having a go at manufactures technicians.
R
rules&rulers
Reply as above.
Flue sited in location which is prone to positive pressure from occasional outside weather conditions. I.e: wind blowing directly down flue?
R
rules&rulers
Exactly,
Wouldn't make a difference.... It's blowing down the intake too then, so pressure is balanced.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
