Let me correct or steer a few things.
* In general plug in devices go on ring mains not lighting circuits due to load
* Any device should be able to be disconnected
* A 50" screen will have some air space behind it for a switched fuse spur
* If the cable is buried in the wall it's half an hours easy work setting a flush back box in to a wall
You have just spent £1500 on a TV, £100+ on a bracket and your not happy to do the electrics the correct way ?
Please stop thinking of 'alternative' ways and do it correctly.
A back box is 60p and a nice steel flat face fused spur plate is £5, a pack of 3A fuses is 50p.
1 hours careful work and £6.10 gets the job done correctly.
* In general plug in devices go on ring mains not lighting circuits due to load
* Any device should be able to be disconnected
* A 50" screen will have some air space behind it for a switched fuse spur
* If the cable is buried in the wall it's half an hours easy work setting a flush back box in to a wall
You have just spent £1500 on a TV, £100+ on a bracket and your not happy to do the electrics the correct way ?
Please stop thinking of 'alternative' ways and do it correctly.
A back box is 60p and a nice steel flat face fused spur plate is £5, a pack of 3A fuses is 50p.
1 hours careful work and £6.10 gets the job done correctly.