Hello,
There appears to be a fault with my boiler.
The heating for the radiators & washing machine works fine.
However the hot water from the taps is the issue.
When I turn on a hot water tap sometimes it heats up the water and sometimes it does not.
It looks like the ignition (for the hot water) works intermittently.
When the ignition does work, the water heats up to a specific temperature (50 degrees) but then cuts off immediately and the water goes cold again.
It's displaying these codes at different times:
s.24, s.27 & s.30
Looking on the forum for similar problems it looks like it might be one or several of these:
-flow sensor
-mesh filter
-hall sensor
-flame detection electrode needs adjusting and/or the minimum burner pressure is out of adjustment.
-diverter valve
-fan assembly
Anyone have any specific idea what it might be?
Also would it be realistic for me to try to fix any of these problems, or is that totally unrelaistic?
Many thanks
There appears to be a fault with my boiler.
The heating for the radiators & washing machine works fine.
However the hot water from the taps is the issue.
When I turn on a hot water tap sometimes it heats up the water and sometimes it does not.
It looks like the ignition (for the hot water) works intermittently.
When the ignition does work, the water heats up to a specific temperature (50 degrees) but then cuts off immediately and the water goes cold again.
It's displaying these codes at different times:
s.24, s.27 & s.30
Looking on the forum for similar problems it looks like it might be one or several of these:
-flow sensor
-mesh filter
-hall sensor
-flame detection electrode needs adjusting and/or the minimum burner pressure is out of adjustment.
-diverter valve
-fan assembly
Anyone have any specific idea what it might be?
Also would it be realistic for me to try to fix any of these problems, or is that totally unrelaistic?
Many thanks