Hi,
I just had a new Vokera Vision C installed, and wonder if anyone knows what the LCD readout is supposed to do. I've emailed Vokera themselves, but don't know when/if they'll reply. I've also read the manual.
The large segments are lined up with the "hour" number.
The manual suggests the small segments represent half past the hour, and large segments represent the first half of the hour.
I read that to mean, e.g. 09:05 is a large segment, and 09:35 is a small segment.
Mine is flashing the small segment in the first half of the hour, on entering programming mode, the first time which appears is 00:00 with the first small segment flashing. So programming it with 08:30 on-time and the large segment above 09:00 is the one flashing. This doesn't seem right to me, but it might be meant to be like that.
I wish the manual had an example LCD readout that showed a time and the segments, which would prove this one way or the other - the manual has the segments and times shown independently, or on a fully set LCD with every segment showing.
Is it working properly and I am reading the manual incorrectly?
Thanks for reading!
I just had a new Vokera Vision C installed, and wonder if anyone knows what the LCD readout is supposed to do. I've emailed Vokera themselves, but don't know when/if they'll reply. I've also read the manual.
The large segments are lined up with the "hour" number.
The manual suggests the small segments represent half past the hour, and large segments represent the first half of the hour.
I read that to mean, e.g. 09:05 is a large segment, and 09:35 is a small segment.
Mine is flashing the small segment in the first half of the hour, on entering programming mode, the first time which appears is 00:00 with the first small segment flashing. So programming it with 08:30 on-time and the large segment above 09:00 is the one flashing. This doesn't seem right to me, but it might be meant to be like that.
I wish the manual had an example LCD readout that showed a time and the segments, which would prove this one way or the other - the manual has the segments and times shown independently, or on a fully set LCD with every segment showing.
Is it working properly and I am reading the manual incorrectly?
Thanks for reading!