Water main into building?

[bobby62]

I need to get a 32mm. MDPE supply into a small building but cannot penetrate through the floor slab using a 100mm duct. What will be the best way to get the pipe into the building, could I rise it up the side of the building and in that way, didn’t really want a 90deg bend and was worried about it freezing up in winter.

Has anyone any better ideas?

 

[seco services]

bring it up the outside and use a groundbreaker insuduct.

 

[bobby62]

bring it up the outside and use a groundbreaker insuduct.

This looks good! I need to run two pipes into the building, can the Groundbreaker allow this (probably need a 15mm & 25mm mdpe.

 

[seco services]

i thought you was useing 1 x 32mm mdpe ?

 

[bobby62]

i thought you was useing 1 x 32mm mdpe ?

Yes, I should have explained further! Its for a rain water tank. I need to run a 32mm. supply in to the building, and also a 20mm mdpe supply from the building back to the tank outside. I don't really want 2 Groundbreakers units though if possible?