- Joined
- 14 May 2016
- Messages
- 3
- Reaction score
- 0
- Country
Hi all.
I've just replaced my wd420 PCB as I had an eeprom error. Now it seems that there is an F08 error whenever the pump in engaged . But the machine also gets stuck in the wash cycle. I had the back open yesterday , I checked everything. Wires to all components , tested resistance to heater element and it's at 30ohms . I took the pump off and checked all pipes and the pump. Everything clear. I checked the pressures switch and it was working and hose and that was clear . I am at my wits end . Can anyone help me with this?
I've just replaced my wd420 PCB as I had an eeprom error. Now it seems that there is an F08 error whenever the pump in engaged . But the machine also gets stuck in the wash cycle. I had the back open yesterday , I checked everything. Wires to all components , tested resistance to heater element and it's at 30ohms . I took the pump off and checked all pipes and the pump. Everything clear. I checked the pressures switch and it was working and hose and that was clear . I am at my wits end . Can anyone help me with this?